The resistance change of strain gauges is usually measured using Wheatstone bridge configurations. The webinar will show what to consider for trustworthy measurements and which pitfalls to avoid.
Webinar: Understanding the Wheatstone Bridge
This webinar has been recorded and was originally held on June 14th, 2016 at HBM in Darmstadt, Germany.
What you will learn in this webinar:
- Why the non-linearity of the Wheatstone bridge configuration is not an issue
- How to compensate for wire resistances in quarter bridges with only three wires
- The way to achieving best measurement results in noisy environments by using carrier frequency