Benefit from our practical on-line glossary to look up the most important technical terms in the field of force measurement.
Force Sensors & Load Cells [N]
Force Sensor Product Finder:
Selected: no filter
Your selection returned 36 results.
The SLH700 is a hemetically sealed strain link, available with or without integrated amplifier.
Force transfer standard for intercomparisons between calibration systems or as a reference force transducer for hydraulic calibration machines.
The C6B compressive force transducer allows cost-effective measurement of forces up to 10 MN, even in harsh environments. Many configuration options.
The U2B force sensor is a proven industry standard for measuring tensile and compressive forces. It offers integrated lateral force compensation.
The C2 force sensor is a proven industry standard for measuring compressive forces. It is fast and offers integrated lateral force compensation.
U10F low-profile force sensors achieve outstanding accuracy and are easily installed due to flange connections on both sides. Ideal for fast measure...
The PACEline CMC series piezoelectric measurement chains convert forces directly into a 0 to 10V signal. Customizable and suitable for fitting proce...
The C10 compressive force transducer offers outstanding precision and robustness and can be adapted to virtually any measurement task. High output s...
Configurable, reliable, compact, dynamic: U9C is a cost-effective miniature force sensor for compressive and tensile force. New: 0-10 V/ 4-20 mA
Configurable, reliable, compact, dynamic: C9C is HBM’s cost-effective miniature force sensor for compressive force. New: 0-10 V/ 4-20 mA
C11 ultra miniature sensors measure compressive force in extremely limited spaces and can endure temperatures of up to 120 °C.
KMRplus force washers are drift-free due to their strain-gauge technology. The sensors are compact, easily integrated & suitable for harsh condition...
Precise, s-shaped S2M force transducer for small forces up to 1 kN. Cost-effective, configurable, and with an overload stop.
The S9M S-type force transducers can be used for measuring tensile/compressive forces up to 50 kN. Robust (degree of protection: IP68) and extremely...
CFT+ piezo force sensors have a wide measuring range and come pre-stressed and calibrated. They are particularly suitable for measuring fast process...
Extremely precise reference force sensor with a high output signal. Measuring range: 10 to 100 % of its capacity. Class 00 per ISO376.
The CFT miniature piezoelectric force transducers are pre-stressed and calibrated. For compressive forces up to 20 kN.
Easy-to-integrate and extremely compact PACElineCLP piezoelectric force washers: 5 mm max. height, for all common thread types.
PACELine CHW series piezoelectric force washers for use in extreme temperatures: -55 °C to +300 °C (-94 °F to 500 °F).
PACEline force washers for measuring shear forces such as process forces in machining processes. Compact: 3 to 5 mm in height.
PACEline CLP piezoelectric force washers fit virtually anywhere due to their minimal height of typically 4 millimeters.
With flanges on both sides, it enables easy mounting. U3 force sensors can also be used with high lateral force.
The low-profile U5 tensile/compressive force transducer is designed as a flange and easy to install. It provides different cables/connectors.
Easy-to-install (flanges on both sides), robust miniature U93 force transducer: Ideal for fast measurements.
The cost-effective U15 reference force transducer can be used as a transfer standard and as a master sensor. Measuring range: 10 to 100 % of its cap...
The BU18 series transfer devices comprise three ring-torsion load cells. 3 MN, other capacities on request.
The C18 compressive force transducer is suitable for use as a transfer standard or reference transducer. Class 0.5 per ISO376.
The standard in many metrological institutes. For inter-laboratory comparisons and top-level comparison measurements, exceeds Class 00 (acc. to ISO3...
KDB special force transducer for verifying testing machines for building materials. EN 12390 compliant. Can be used as a transfer standard up to 3 MN.
Force transducers with four strain gauge full bridges (each one offset by 90°): For the ISO 7500-1-compliant verification of material testing machin...
Z30A high-precision reference force transducer for small forces. Suitable for use as a reference standard or reference sensor.
Proven and precise Z4A reference force transducer for forces from 20 kN. Suitable for use as a reference standard or reference sensor.
The SLB strain transducers are screwed onto the structure. Force is measured by determining a structure’s deformation due to an applied force. Cost-...
The SLB700A/06VA is a screw-on strain transducer that enables cost-effective force measurement. With integrated electronics.
Force Measurement Know-how
Force Measurement Tips & Tricks
Take a look at our knowledge database and learn how to correctly measure force with the help of technical articles, white papers and video tutorials.
You might also be interested in
Contact us Please send a message and a representative will contact you shortly.
Get a quote now!
Ask your HBK Sales EngineerPlease send me