HBM Force Sensors and Force Transducers with strain gauge or piezo technology measure static and dynamic tensile and compressive loads - with virtually no displacement.
Selected: no filter
Your selection returned 30 results.
CFT+ piezo force sensors have a wide measuring range and come pre-stressed and calibrated. They are particularly suitable for measuring fast process...
C15 can be used as a reference load cell (master) in standard test machines, and for applications in test benches. It fulfills ISO376 Class 00 requi...
Dynamic and immediately ready for use: U9C is HBM’s cost-effective miniature force load cell for compressive and tensile forces.
Dynamic and immediately ready for use: C9C is HBM’s cost-effective miniature force sensor for compressive force.
The S2M S-type load cell is the most accurate of its kind for measuring small forces and has an excellent price-to-performance ratio.
The U1A series force transducers are specially designed for measuring small tensile and compressive forces in laboratory applications.
Load washers of the PACEline CFW series are ideally suited for production and for experimental measurements with high requirements on dynamics.
PACEline CSW miniature load washers help measure shear forces reliably. Its typical applications include force monitoring of machining processes.
PACEline CLP piezoelectric force washers fit virtually anywhere due to their minimal height of typically 4 millimeters.
The U2B load cell is the industry standard when it comes to compressive and tensile force measurement
The U3 load cell can be installed in minutes. This makes it the ideal choice for numerous applications in production and monitoring.
The U5 load cell for tensile and compressive forces can be installed within minutes, and has a very low overall height.
The U93 miniature load cell is used in production and during all test tasks, where space requirements, measurement dynamics and simple assembly count.
The amazingly cost-effective U15 precision load cell is ideally suited for use both as a transfer standard and as a calibration reference sensor.
The C2 load cell is the industry standard when it comes to compressive force measurement: reliable, robust and durable.
The HBM build-up systems for use as a force reference standard consist of 3 parallel force transducers, exceeding class 00 requirements.
The KMR series force washers are compact and especially suitable for monitoring tasks, because they are drift-free.
The C18 reference transducer is well-suited for use as a transfer device or as a reference sensor in calibration machines.
TOP sensors from HBM are used when standard reference sensors reach their limits and fail in calibration tasks and reference measurements.
The KDB special force transducer has been designed to comply with the requirements of EN 12390 for verifying building materials.
The Z30A force transducer is designed as a reference standard for verification of calibration machines, and many other precision measurement tasks.
The Z4A is a reference force transducer that has proven its utility in many metrological institutes worldwide. Available up to 500 kN
Proven for decades, the SLB strain sensor is being used in applications that do not require or need to necessarily achieve extremely high accuracy l...
Active strain transducer with voltage or current output, enabling large forces to be measured in a cost efficient way.