• Wall or DIN rail-mount basic device for 5 PMX modules for up to four measurement or two I/O modules and one real-time Ethernet fieldbus module
  • Max. 16 measurement inputs with 24-bit A/D converter and up to 38.4 kHz sampling rate per channel 
  • 32 real-time calculation channels with peak/limit values and mathematical and scientific functions
  • All measurement and calculation signals can be used in parallel via fieldbus or Ethernet interface or are available for further signal processing via the PX878 analog outputs
  • Short setup time and test cycles thanks to up to 1000 parameter sets/measurement programs stored in the PMX
  • USB 2.0 host interface for reset of device parameters, network settings and user passwords (data storage and monitoring soon available)
  • Integrated, password-protected 3-level user interface (worker/service/administrator)

Module WGX001 with additional CODESYS Soft PLC (IEC61131-3)

Identical with WGX002, however, with additional CODESYS Soft PLC (IEC61131-3) as well as web visualization and CANopen (ISO11898) interface

CODESYS: CODESYS Runtime license already stored in the device, CODESYS software V3.5, PMX package and example on CD included in scope of supply
Available memory in the PMX: 10 MB RAM, 100 MB Flash memory
Up to 100 tasks can be used with 300 Hz timer resolution, i.e. timer-controlled tasks up to 3.33 ms

Up to 30 CODESYS channels can be used directly in the PMX for further processing or output, depending on the hardware configuration

CANopen: In combination with CODESYS, the PMX can be operated as CANopen master or CANopen slave via the CANopen interface. All CANopen based sensors and field modules can be integrated.

HBMshop 查看價格、庫存並獲得報價
馬上獲取報價!

向HBM銷售工程師詢問

請發給我:


開始詢價

向HBM銷售工程師詢問

請發給我:


開始詢價

單獨出價

技術諮詢

快速回應