Digital Input Card (GN6470)

The Binary Marker card is a dedicated binary input option for GEN DAQ products.

It enables to record up to 64 binary input channels (marker channels) with up to 1 MS/s per channel. In addition 9 binary input channels can be assigned under software control to provide 3 channels of timer/counter functionality. Each channel can have its own function.

The timer/counter functionality includes: General purpose up/down counter Frequency/RPM counter Quadrature/ position measurements. The counter/timer functionality uses up to 3 event bits per channel. These event bits also keep their original functionality. E.g. you can use a quadrature encoder and at the same time look at the quadrature signals separately.

HBM Perception software provides integrated display and control of the event and timer/counter channels, that are recorded in parallel with the analog channels. A full range of features is available for each channel seperately to make the best use of the event channels.

Settings include name, units, invert and storage on/off. In addition each event channel can be used as a trigger condition, a qualifier or an alarm. Each of these conditions can be set to either positive/negative or high/low active. This combination of features gives you the capability to create complete "bit patterns" to be used as trigger or qualifier.

Note: The timer/counter channels cannot be used for triggering or alarm.

Related Products

GEN3i
流盤速率高達 200 MB/s 高速瞬態記錄,觸摸屏用戶界面.
GEN7i
GEN7i 強大的數據記錄儀,流盤率高達350 MB/s,高速瞬態記錄,觸摸屏用戶界面.
GEN3t
來自HBM強大的GEN3t高速數據採集系統,專門用於控制櫃安裝 (19 '').
GEN7tA
提供高速數據採集和瞬態記錄,滿足高端要求,快速,可靠,靈活,精確.
GEN17tA
GEN17tA提供高速和大通道數據採集和瞬態記錄,滿足高端要求.
聯繫我們 如果您希望與HBM聯繫,無論是技術問題還是希望進行商務合作或者是產品諮詢,我們都將為您服務