Genesis HighSpeed Transient Recorder & Data Acquisition System

Genesis HighSpeed is the modular platform for fast measurements of electrical and mechanical parameters. A transient recorder, data recorder and data acquisition system – all in one. Thanks to its modular architecture it is equipped for any high speed measurement task. Build your own configuration consisting of a mainframe, data acquisition card and Perception software.

Also available: Devices with signal conditioning for all commonly used sensors and fibre optical isolated digitizers for signal acquisition, even in the high-voltage range.

Modular

Choose from 7 different mainframes
With or without integrated PC
Windows or Linux based
Multi-Mainframe capabilities
Optical Master / Slave
PTPv2 and IRIG synching

Fast

Sample rates from 20 kS/s to 250 MS/s
Isolated digitzers with 25 or 100 MS/s
14 to 24 bit resolution
Continuous streaming to PC with 200 MB/s per mainframe
Data compression during transfer fur further speed increase
Local storage with up to 400 MB/s per mainframe
Continuous recording or triggered sweeps – up to 200 per second

Safe

Stand alone operation without PC connected
Linux based OS in tethered acquisition units
Local SSD RAIDs for storage without network
Safe recovery of data after power loss
Reliable hardware triggers per channel
Optional optical interfaces for data, synch, and trigger to eliminate noise issues

Combine a mainframe, the input boards which fit best, and Perception software. Or integrate the Genesis hardware into your own software.

Versatile Applications

Aerospace

Functional Test and error analysis of on-board electronics
Rocket motor tests
Satellite tests
Wind tunnel tests
Detection of lightning strikes
Chicken gun test

Energy / High-Voltage

Circuit breaker and switchgear testing
Lightning impulse analysis
Switching impulse analysis
Analysis of transient recovery voltage (TRV)
Fuse test

Material Testing

Automotive

Management on injection systems
Analysis on ignition coils

Electric Drives & Generators

Power and efficiency of electric drives
Vibration analysis
Grid measurements

Service

Preventive maintenance and inspection
Previsions according to maintenance plan
Troubleshooting

How to Interface with Genesis HighSpeed and/or Perception

Would you like to use Perception software and/or the Genesis HighSpeed system for your own specific needs? No problem! You can integrate them into your specific environment and use them exactly the way you want by selecting one of the many different interfacing options.

Learn more

Select your Genesis HighSpeed DAQ System

Use the filter below to define the signals/sensors and the speed of your measurement, the quantity of channels and the kind of mainframe you need. If you aren't sure about a requirement, just leave it open.