Watch and read our collection of video tutorials and tech-notes about catman DAQ software and QuantumX
catman data acquisition software is easy to use. To learn how easy it is, watch our useful video tutorials, read our tech notes and start your measurement straightaway.
New Video Tutorial & Tech Note
catman WebServer allows you to access your test & measurement job remotely. This video tutorial shows you how to set it up and how to operate it.
Field: lab and mobile testing
Version: from version 5.0
More info: TECH NOTE available
Length: 01:29 min
In this digital age everything should be possible: Remote access to your test lab and/or PC and data recorder in your lab, test bench, a vehicle or an infrastructure monitoring station. Set up catman WebServer and benefit from:
- Access any time from anywhere and any device type (Linux, Android, iOs, etc.)
- Faster response and reaction in delivering results to increase productivity
- Comprehensive perceivability and control over your running test
- Quickly check operation and current status to troubleshoot any issues
- Downloading data files for local or server-based data analytics
- Allow collaboration and education from the distance
Watch how easily you can acquire road load data with catman and use many useful functions, like visualization of GPS data in map extracts and online calculations such as rainflow analysis.
This TECH NOTE describes typical application examples of stand-alone data recording using the CX22-W QuantumX data recorder based on catman Easy software and provides tips and hints for optimal parameterization.
This Tech Note describes how to acquire SAE J1939 CAN signals with QuantumX MX840A or MX471 and the PC software catmanEasy from HBM.
This Tech Note describes how to integrate a non HBM product / 3rd party device over RS232 into catmanAP and is based on an example using the scripting engine “EasyScript” which is part of the catmanAP package or the Data Recorder CX22 or CX22-W.
The Tech Note describes how to handle very slow sample rates in catman (<1Hz). This is necessary e.g. in monitoring applications.
This Tech Note describes the related workflow from the configuration of the video cameras to the post processing of the recorded measurement and video data.
This Tech Note describes the workflow to configure the channels of a DAQ system consisting of HBM Quantum X amplifiers and the data acquisition software catman©Easy / AP by using external sensor databases.
This Tech Note describes how to send CAN signals via the embedded script functionality of catmanAP.
This TECH NOTE shows in principle the Auto Calibration Routine of analog inputs and how to optimize it.
This TECH NOTE describes how to get some system information and log files when working with QuantumX and QuantumX Assistant or catmanEASY / AP.
This TECH NOTE how to monitor a signals frequency and amplitude by demoing a stimulated frequency sweep to a certain input of your Test & Measurement setup.
This TECH NOTE describes how to use the digital output on QuantumX amplifier MX840, MX440, MX410 or MX460. The amplifiers above offer on pin 15 of the SubHD-15 connector a digital output which can be activated by the PC software level.
This Tech Note describes how to parameterize QuantumX digital inputs and outputs of MX879 in catmanAP.
This TECH NOTE basically deals with the acquisition and analysis of acoustic signals by means of a measuring microphone, QuantumX measurement electronics, an MX410B amplifier, and catman®AP software.
The Tech Note describes how to generate a predefined digital output signal on QuantumX MX879 using Catman-Sequencer.