Correct Welding of Strain Gauges

Step-by-step Tutorial on Welding Strain Gauges

To give a short overview of how a weldable strain gauge is applied, the following steps outline the installation procedure:

1. First, clean the surface. Remove bigger impurities by an emery paper to ensure that the surface is purely metallic (which is important for the welding process)

2. Position the strain gauge on the steel surface

3. Position the pistol of the spot welding device on the gauge carrier, and perform the spot welding by pulling the trigger

4. Tackle the strain gauge carrier to the metal surface with a series of small welding spots, as shown in the welding spots pattern below

Related Content

LS31 - soudable
LS31 est une jauge soudable pour composants métalliques et à températures élevées. Destinée également à équiper des structures « sur site ».
K-OP: Configurable Optical Sensors Chain
Optical strain gauges with outstanding bending capability and high performance coatings for high strain measurements.
Impact of Spot Welded Strain Gauges to Materials
What influence do weldable strain gauges have on the base material? Extensive tests on our behalf should answer this question.
Welding or Bonding Strain Gauges?
Welding and bonding are the two primary techniques used to install strain gauges. But when to use which technique? We provide you with a checklist.
Contactez-nous Nous sommes à votre écoute pour répondre à toutes vos demandes.