力: 是非常重要而且最經常被測量的機械量。但是,在測試台和工業程序控制中經常遇到以下問題:
- 壓電還是應變技術 - 哪種是力測量的最合適的選擇?
- 如何測量分力 - 也就是無需其他力感測器?
- 如何配置測試設備來保證精確的力測量?
- 關於測量的不確定性,哪些因素需要考慮?
我們的技術白皮書和教程提供了重要的技巧和提示,使您能夠準確地進行力測量。
力測量的最新文章
力測量最新視頻
HBM Force Measurement Products
壓電或應變技術 - 什麼是力測量的正確選擇?
Force Washers for Production, Testing and Monitoring
Find out about strain gauge-based and piezoelctric force washers, and which measurement tasks and conditions require which technology.
Video: Force Measurement Methods
Our new video on force measurement methods gives a 2-minute overview of the methods that best fit your application.
Galvanic Separation in Piezoelectric Measuring Chains
Read our new technical article to learn how galvanic separation facilitates installation of piezoelectric test and measurement equipment in the field.
Measuring Small Forces with High Initial Load
In this article we present the advantages of piezoelectric sensors and sensors based on strain gauges measuring small forces with high initial load.
Force transducers based on strain gauges
Force transducers based on strain gauges have a so-called spring element or loaded member where the forces to be measured are applied.
Piezoelectric force transducer: 5 rules for installation and mounting
Do you want to use piezoelectric force transducers? If so, you should make sure that you observe our 5 rules for installation and putting into operation to
The piezo effect and its applications
The white paper describes the piezo technology in a nutshell.
Piezoelectric or Strain Gauge Based Force Transducers?
Piezoelectric sensors or strain gauge (sg) based force transducers - when is which principle appropriate in force measurement?
如何通過分力進行力測量 - 也就是不完全使用力感測器?
Measuring forces in the force shunt
Sometimes it is of advantage to measure force in the force shunt. This article presents three methods used for measurement in the force shunt.
Calibrating the measuring chain
After mounting, the force washers should be calibrated to allow reliable sensitivity determination of the measuring chain.
如何配置測量設備進行正確的力測量?
PMX Adjustment Assistant - Sensor Adjusment Made Easy
Sensor adjustment made easy: The new PMX Adjustment Assistant guides you through the process.
Connection Cables for Strain Gauge Sensors
How to choose the right connection cable for your sensor? Learn the difference between cables and leads, and what to consider when making a selection
Adjustment of Electronics for Force Measurements
Read the technical article to find out how to correctly adjust your electronics to match your force sensor and ensure your measurement is reliable.
Connecting a Force Sensor to a Data Acquisition System
How to connect force sensors to amplifiers and DAQ systems? Our video tutorial guides you step by step through the setup of a force sensor.
Electrical Connection of Force Transducers
In this article from HBM you learn what you should keep in mind for the successful electrical connection of force transducers.
Installation of Force Transducers
Often a force transducer cannot be calibrated in the application. Achieving reliable measurement results depends on the installation situation.
What needs to be considered regarding the topic of measurement uncertainty?
The Load Cell Calibration Standard ISO 376
Force sensor calibration DIN EN ISO 376 are more complex than other calibrations, but also more accurate. Learn about what happens and what the values are.
High accuracy is high efficiency
Highly accurate transducers enable completely new applications in force measurement technology: technological masterpieces, solid economic advantages.
The Key to New Applications: Precision
High-precision transducers can be flexibly used for different measurement tasks and enable force measurement chains with high mechanical reserves.