HBM puts forward a wide range of easy-to-setup accessories and ready-made sets to complement or improve your optical measurement chain and system based on the FBG technology.
Patch cables are used to extend optical fiber lengths. These cables have an optical plug on each end and are connected by an optical socket.
Cable pigtails are fitted with an optical plug on one end and can be connected to a fiber optic cable or fiber optic sensor with a splice connection at the other end.
Patch cable with 9 µm core diameter:
- FS82 - Indoor Patch Cable: Optical fiber cable with selectable lengths for indoor use (9 µm core fiber, LSZH outer buffer with 3 mm diameter, Kevlar reinforcement, two connectors)
- FS83 - Outdoor Patch Cable: Optical fiber cable with 20 m length for indoor use (6 µm core fiber, LSZH outer buffer with 3 mm diameter, Kevlar reinforcement, two FC/APC connectors)
Patch cable with 6 µm core diameter:
- 1-OPT-PCOMF03LSZH: Optical fiber cable with 3 m length for indoor use (6 µm core fiber, LSZH outer buffer with 3 mm diameter, Kevlar reinforcement, two FC/APC connectors)
- 1-OPT-PCOMF20LSZH: Optical fiber cable with 20 m length for indoor use (6 µm core fiber, LSZH outer buffer with 3 mm diameter, Kevlar reinforcement, two FC/APC connectors)
- 1-OPT-PCOMF05ARM: Optical fiber cable with 5 m length for outdoor use (6 µm core fiber, PE buffer with 3mm diameter, Kevlar and stainless steel reinforcement and, FC/APC connectors)
- 1-OPT-PCOMF20ARM: Optical fiber cable with 20 m length for outdoor use (6 µm core fiber, PE buffer with 3mm diameter, Kevlar and stainless steel reinforcement, two FC/APC connectors)
HBM FiberSensing optical adapters for FBG sensors are used to connect several sensors in series with minimal optical losses.
1-FS80 100 - Optical adapter FC/FC
1-FS80 300 - Optical adapter SC/SC
For more information please refer to the PDF "HBM FiberSensing Accessories" in the "Documents" section below.
1-FS-FIBERTESTER
Red laser light source used for troubleshooting optical fiber systems, e.g. to determine fiber breaks or evaluate bending radii. The optical connecting socket of the fiber tester is designed for FC/APC plugs.
1-FS-CLEANER
Cleaning tool for optical connectors.
1-FS-SPLITTER
Fiber optic splitter 1x2 with FC/APC connectors.
