EP150: Hot-Curing Epoxy Resin Adhesive

EP150 is a hot-curing epoxy resin adhesive. The terms "hot curing" implies that this adhesive can only be used if the test object can be heated to the required temperature (160°C–190°C).

Hot-curing adhesives like EP150 will ultimately contribute to meeting the requirements of greater accuracy. For instance, it can be used in transducer construction and also in some experimental applications. EP150 is suitable for all available types of strain gauges.

Note: EP150 is only suitable for smooth surfaces.

  • Hot-curing adhesive. Curing times with 10 to 50 N/cm2 contact pressure are as follows: 1 hour at 190°C/374°F; 3 hours at 170°C (338°F); and 6 hours at 160°C (320°F).

Buy EP150 epoxy resin adhesive in the online shop

  • 1-EP150: two 20 ml bottles
    Enough for around 300 strain gauges*.Also includes all accessory parts required for installation (heat resistant adhesive tape, fluoropolymer release film, silicone rubber, instructions for use, safety data sheet).
    Buy Now

*The specified quantities are approximate recommended values only, as adhesive consumption also partly depends on the size of the strain gauges being used.

Product Literature

Naam / OmschrijvingTaal
Data sheet
French, English, German
Meerdere talen
Declaration of Conformity
German, English

Related Article

Related Products

Rekstrookjes en accessoires
HBM strain gauges (stress gauges) for all strain measurement applications: Experimental stress analysis, durability testing, transducer manufacturing.
Adhesives & Bonding Material
Choose from our range of Adhesives from HBM to meet even the most stringent demands when it comes to bonding strain gauges to the test object.
Strain Gauge Accessories
With its strain gage accessories, the HBM product range offers everything necessary for a good strain gage application.
HBMshop Bekijk de prijzen, beschikbaarheid en creër direct een offerte.