FS63: High Performance Fiber Bragg Grating (FBG) Temperature Sensors

FS63 Optical Temperature Sensors are suited for temperature measurements in large structures, such as Structural Health Monitoring(SHM) in civil structures and thermal mapping in electrical machines.

Their small size and weight makes them the ideal choice for hard-to-reach locations and measuring points.

Designed to be bonded to surfaces and materials, spot welded to structures and components, attached or directly cast into concrete wet mix, FS63 Temperature Sensors can also be used for thermal compensation of other optical sensors.

 

Passive

  • Inherent immunity to all electromagnetic effects (EMI, RFI, sparks, etc)
  • Electrical isolation

Safe operation in hazardous environments (e.g. potentially explosive atmospheres, high voltage areas and intense electromagnetic fields)

Multiplexable

  • Connection of a large number of sensors to a single optical fiber
  • Multipoint measurements

Reduction of installation complexity: much simpler sensing networks and cabling

Reliable

  • Based on the measurement of an absolute parameter - the Bragg wavelength - independent of power fluctuations

Self-referenced: high quality measurements with long term stability and low losses even in remote sensing

Robust

  • Innovative sensor design
  • Ruggedized stainless steel or composite packaging
  • IP68 in embedded sensors
  • Kevlar and PTFE strength layers in the Dielectric Probe

Enhanced lifetime: even under adverse conditions (humidity, salt, EMF, pressure…)

Available Configurations

Special FS63 High Temperature Dielectric Probe

  • Heat-resistant
  • Completely non-metallic
  • Highly dielectric
  • Extended temperature range

Product Literature

題目/描述語言
參數表
Japanese
English
English
Japanese
產品手冊
German
English
Japanese
裝配指導
English
English
English
附件
English
Japanese
其他
English
English
English
English
English

Optical Monitoring System for Strain Measurement

English

Optical Monitoring System for Strain Measurement

English
Tech Notes

Optical Monitoring System for Strain and Convergence Measurement

English

Related Products and Applications

光纖感測器
HBM FiberSensing offers a wide range of Fiber Bragg Sensors (optical FBG Sensors) and optical interrogators.
FS22: Industrial BraggMETER
靜態和動態光纖解調儀,專門用於在工業環境中光纖(FBG)感測器
FS42: Portable BraggMETER
FS42可擕式BraggMETER – 用於實驗室和現場測試的光纖解調儀
Frequently asked questions
Concise answers to the most frequently asked questions about optical strain gages and fiber bragg grating technology.
HBMshop 查看價格、庫存並獲得報價
馬上獲取報價!

向HBM銷售工程師詢問

請發給我:


開始詢價

向HBM銷售工程師詢問

請發給我:


開始詢價

單獨出價

技術諮詢

快速回應