The Somat eDAQ Simultaneous High Level Layer (EHLS) offers 16 simultaneously sampled high-level differential analog inputs through independent connectors. Up to four EHLS layers can be added to a single eDAQ system enabling up to 64 channels. Networking multiple eDAQs make synchronous EHLS channel counts virtually limitless.
The EHLS can inherently handle any analog input from +/- 80V, and together with the Somat SMART conditioning modules, is a real multipurpose layer. Practically any input--thermocouples, strain gauges, accelerometers, microphones, amplified and unamplified transducers--can be utilized with this layer. Software-selectable sample rates, transducer power, and digital filtering simplify the set-up of any channel. There are also several calibration options, including defined value, external, and multipoint, as well as shunt calibrations with embedded software tools when using the Strain SMART Module.
The EHLS is available with an optional Analog Out. Calibration files, directly compatible with popular simulation software, scale the analog outputs to engineering units.
Size: 9.2"W x 9.7"L x 1.3"H (23cmW x 25cmL x 3.3cmH)
Weight: 4.4lbs (2.0kg)
Temperature: -20° to 65° C
Connectors: (16) Somat M8 Female Bulkhead Connector
Minimum full-scale: ±62.5mV
Maximum full-scale: ±80V
10MΩ = Ranges up to +/- 10V
100kΩ = Ranges greater than +/- 10V
Resolution: 16-bit ADC, across specified full-scale range
Sample Rates: Independently set
100 kHz Master Clock= 0.1 Hz to 100 kHz
98.3 kHz Master Clock= 0.1 Hz to 98,304Hz
Transducer Power: 3V to 28V in 1V increments, 400mW per channel
Analog: 25 kHz, 8-pole Butterworth low-pass filter
Digital: Software selectable; 8-pole Butterworth and Linear Phase
(16) Somat SAC-TRAN-MP-2 Transducer Cables (2 m)
Somat eDAQ Simultaneous High Level Layer, Analog Out (EHLS-AO)
The Somat eDAQ Simultaneous High Level Layer, Analog Out (EHLS-AO) outputs are conditioned analog output signals that can be used in the creation of time-domain lab durability tests. When setting up the laboratory simulation, the Somat eDAQ system is brought into the lab with the component or vehicle. This practice is highly recommended, as it ensures that all of the transducer instrumentation and properties are exactly the same for the lab simulation as they were for the field data collection. Instead of being recorded, the analog-out signals are sent as time series data for the test rig to analyze. The controller can then develop drive files that are played into the test rig, reproducing exact field dynamics in the lab.
The same signal conditioning, set-up file, and calibrations used in both the field and lab.
Ease of Set-up
Configure the eDAQ once, use it in both applications. The Analog Output Calibration File is directly compatible with popular simulation software.
(1) Somat SAC-TRAN-AO-2 Analog Output Cable
Part Number Code
The following number scheme is used to identify the layer configuration.
EHLS - XX
eDAQ Layer EHLS
B = Base Layer. AO = Analog Out.