See a live presentation about the advantages of digiCLIP from Michael Guckes, Product and Application Manager at HBM Test and Measurement. The interview was made on the SPS/IPC/DRIVES trade show in 2011.

digiCLIP - 生産工程にデジタル化を導入

digiCLIP は工業用途に適したモジュラータイプの計測システム

力、重さ、トルク、圧力を最新の技術により計測します。

digiCLIPは、デジタル時代の工業用デジタルアンプです。簡単にインストールでき、素早い信頼の計測を可能にします。

18秒以内に計測を即開始
digiCLIPはシステムの休止の発生を極力防ぎます。

TEDS(Transducer Electronic Data Sheet: 変換器電子データシート)をサポートしていますので、変換器がつながれた瞬間に認識、設定を行います。複雑な設定とパラメータ設定はもう必要ありません。digiCLIPは、まったく計測が初めての方にも簡単にセットアップしていただけます。

オートメーションシステムに簡単に統合
digiCLIPはスタンダードPROFIバス、DP-V1、CANバスインターフェースを使用しているので、簡単にオートメーションシステムに統合することが可能です。

全ての計測機器の設定は、付属の無料digiCLIPソフトウェアによりPCを通して行うことが可能です。「プラグ・アンド・メジャー」、「ホットスワッピング」機能により、システムの電源を落とさずにアンプの交換、取り付けが可能です。

主な特徴

  • 機械のステータスをモニタリングするのに適した、力・圧力・トルクの計測用モジュラーシステム
  • 高精度な搬送周波数方式による、厳しい工業環境での安定した干渉保護オペレーション
  • 素早いセットアップのためのTEDS 変換器自動認識方式
  • CANbus及び PROFIBUS Easy の標準装備により、制御システムへの低コストな導入が可能
  • その完成された、リアルタイム分析機能により、digiCLIP は制御システムだけでなく、生産・製造工程での様々な用途に自由にフィットさせることができる

digiCLIP modules

DF30

DF31

600 Hz carrier frequency

TEDS sensor recognition

Number of digital inputs

-

1

Number of digital outputs

-

2

Interfaces:

  

CANOPEN

DF30CAN

DF31CAN

Profibus-DP

DF30DP

DF31DP

DeviceNet

DF30DN

DF31DN

Device Type Manager (DTM)

Efficient system asset management: Device Type Manager (DTM) enables central access to all digiCLIP amplifiers

The new, free Device Type Manager (DTM) provides central access to all digiCLIP amplifiers of your production system.

The DTM offers parameterization, control, and diagnostics functions. In addition, it provides a graphical user interface for intuitive handling. Installing the DTM is as easy as installing a printer driver on your PC. It can be integrated into any application using the standard FDT interface (Field Device Tool), for example, a monitoring or control system, engineering or asset management.

digiCLIP DTM Certification

The advantages of a system featuring an FDT interface and DTM are obvious: From a central point in the system, the service engineer has access to all digiCLIP amplifiers by as little as one double-click and immediately gets a status report. Then he can start a detailed diagnosis and, on occurrence of an error, eliminate it without having to access the instrument directly.

Even if you are already using digiCLIP amplifiers, you can easily upgrade with the DTM. Click on software/firmware downloads in the right column to get the free download.

ePLAN

In addition to the industrial amplifiers HBM provides the appropriate ePLAN macros. They allow easy and error-free integration of the instruments in the project planning of the automation environment.

ePLAN Electric P8 is an engineering tool for modern CAE software supported by a database and facilitates consistent project planning, documentation and administration of automation systems. ePLAN macros enable users to easily integrate the process controllers in their project planning. Parts data, drawings and pin assignments are available in ePLAN Electric P8 immediately after import of the macros.

The free macros are available on the documentation CD included in the process controllers' scope of supply and can also be downloaded here.

Product Literature

タイトル/詳細 言語
データシート
French
English
German
French
English
German
Italian
French
English
German
French
English
German
French
English
German
French
English
German
Italian
ブローシャー
English
German
操作マニュアル
German
French
English
German
French
English
German
French
English
安全指示書
French, German, English
Declaration of Conformity
多言語
ソフトウェア

digiCLIP Assistant, Firmware Loader and USB Driver (for Windows XP, Windows Vista and Windows 7/8/10) for easy setup of digiCLIP modules and for visualization.

For smooth operation of modules with CAN and DeviceNet interfaces, use the PEAK USB-to-CAN dongle.

For Profibus operation Hilscher and Siemens CP5511/12 and CP5711 is supported - to handle digiCLIP firmware-updates via CP5711 digiCLIP-modules have to be equipped with a adapted bootloader which is implemented starting with following serial-numbers: (DF30DP: 816711801 / DF31DP: 817427801).

All required drivers are included and will be installed during startup.


Date: 04/2016
Version: 2.6.5
Size: 77 MB
Related Documents:
多言語

This project is a macro-project and contains CAE data for Eplan Electric P8.


Date: 08/2011
Version: 1.00
Size: 42 MB
多言語

Contains the installation of the DeviceDTM in German and English for Windows 2000/XP/Vista/7/8/10 operating systems.

Prerequisite for using digiCLIP DTM setup is the installation of a frame application (e.g. FDT container, PACTware) - not included in this download.


Date: 12/2010
Version: 1.2.0.166
Size: 13 MB
Related Documents:
多言語

EDS files for digiCLIP DF30CAN and DF31CAN.


Date: 06/2014
Version: 1.36 / 1.20
Size: 13 KB
多言語

EDS files for digiCLIP DF30DN and DF31DN.


Date: 05/2015
Version: 1.12
Size: 25 KB
多言語

The CX-Integrator example program shows the basic test setup of a digiCLIP DF31DN connected to an Omron Sysmac CJ1M SPS with a CS1/CJ1 DRM21 fieldbus controller. In this example, consistent (coherent) data is read and written over the DeviceNet. The DF30DN operating manual provides all possible commands and values. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 763 KB
多言語

This applicatin is to describe an example of a small-scale digiCLIP amplifier application in a CAN network using a CANopen based PLC. In this application, load cells implemented as strain gage full bridges are used for determining the filling level in a tank and taring it to 0 ... 100% using a PLC connected to the digiCLIP. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 1 MB
多言語

This example considers a simple test assembly including a Siemens CPU313-2DP and a DF30DP/DF31DP (digiclip). In this example, consistent (coherent) data are written and read via the Profibus with SFC14 and SFC15. As an additonal programming the parametercontainer is programmed to configure the DF30DP in the cyclic data exchange. To read configurations with DPV1 the Siemens function block SFB52 (PNO AK1131)is programmed, too. All commands and values for the configuration are shown in the official manual.

Legal notice: The example given is intended to illustrate the integration of the DF30DP into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 7 MB
多言語

Archive including all current firmware files for modules of the digiCLIP series. The appropriate firmware loader is part of the digiCLIP assistant. The zip file has to be extracted into the digiCLIP assistant download directory.

DF30CAN version 1.44
DF31CAN version 1.28

DF30DP version 1.42
DF31DP version 1.28

DF30DN version 1.12
DF31DN version 1.12


Date: 05/2015
Size: 555 KB
Related Documents:
多言語

GSE/GSD files for digiCLIP DF30DP and DF31DP.


Date: 12/2012
Version: 1.34
Size: 3 KB
多言語
Tech Notes

This is an instruction for creating a FDT (Field Device Technology) project with the fdtCONTAINER which connects a Profibus digiCLIP (DF31DP) with a PC via an Ethernet gateway (THxEPI2).

German

This is an instruction for creating a FDT (Field Device Technology) project with the fdtCONTAINER which connects a Profibus digiCLIP (DF31DP) with a PC via an Ethernet gateway (THxEPI2).

English
HBMshop 価格・納期の確認、クイック見積もりはこちらから
見積もり希望

こちらからお気軽に見積依頼

ご希望内容:


問い合わせる

こちらからお気軽に見積依頼

ご希望内容:


問い合わせる

柔軟な対応力

技術コンサルティング

速やかな対応