Tuesday, September 1, 2020       03:00 PM CET | 08:00 AM CT |  09:00 AM ET       online

In this webinar you will learn how to easily fine-tune and maintain algorithms running on Electronic Contrul Units (ECU). Additional sensor data, integrated via xCP interface, helps to understand the overall physics and to optimize software functionality.

Saber mais

  Wednesday, September 2, 2020       10:00 AM CET       online

The webinar will provide a general introduction to Reference Transducers and Precision Amplifiers including recommendations on measurement uncertainty.

Saber mais

  Wednesday, September 2, 2020       04:00 PM CET | 09:00 AM CT | 10:00 AM ET      online

In this webinar you will learn how to easily fine-tune and maintain algorithms running on Electronic Contrul Units (ECU). Additional sensor data, integrated via xCP interface, helps to understand the overall physics and to optimize software functionality.

Saber mais

  Tuesday, September 15, 2020       11:00 AM CET       online

A general introduction to the Type 2250 analyzer for users new to the instrument. It will cover using the meter to make measurements and transfer the results to a PC.

Saber mais

  Tuesday, September 22, 2020       11:00 AM CET       online

Join this open forum for Type 2250 and 2270 owners to learn how to get the best from your sound level meter. Subjects covered include establishing multiple users/templates and using data in other software.

Saber mais

  Tuesday, September 29, 2020       11:00 AM CET       online

Introduction to our Measurement Partner Suite covering data management and transfer, display, archives, export and post-processing.

Saber mais

  Tuesday, October 06, 2020       11:00 AM CET       online

B&K 2245 is the latest in our range of iconic sound level meters providing a complete solution for basic noise measurements, while combining functionality, ease-of-use and versatility with the reliability and confidence that is ensured with the Brüel & Kjær brand.

Join this webinar to learn more!

Saber mais

  Tuesday, October 13, 2020       11:00 AM CET       online

A introduction in how to make Sound and Impact Insulation measurements to current standards.

Saber mais

  Thursday, August 18, 2020       1:30 AM ET/11:00 AM IST/7:30 AM CET      online

Failure Mode and Effect Analysis (FMEA) is a very well known method used to discovering potential failures that may exist within the design of a product or process. Using Design FMEA (DFMEA), you can generate necessary information to quantify the reliability and use that as a baseline indicator to check whether it meets the Reliability Target. This webinar will discuss the process of translation such information from DFMEA to a Quantified Reliability Estimate using ReliaSoft XFMEA software.

Saber mais

  Thursday,September 17, 2020       5:30 AM ET/3:00 PM IST/11:30 AM CET       online

Time to market is a critical factor in any product’s success. With today’s high reliability requirements and short development cycles, testing for the full product life is expensive and impractical. By testing at elevated stress levels, the reliability of a component can be quantified in a shorter period of time, while saving money and resources. This process is called quantitative accelerated life testing (QALT) and employs several statistical and practical techniques to characterize product behaviour. During this webinar, we will introduce the theory and principles of QALT and life testing using Accelerated Lifes Testing module available in ReliaSoft Weibull++ software.

Saber mais

  Monday, October 26, 2020       1:30 AM ET/11:00 AM IST/7:30 AM CET       online

During this webinar, attendees get familiar with will the principles of reliability growth testing and strategies using ReliaSoft Weibull++ software.

Saber mais

  Wednesday, November 11, 2020       5:30 AM ET/3:00 PM IST/11:30 AM CET      online

Reliability and durability fit together in product validation testing. Often, the product’s life requirement is being able to withstand loading over a specified duration with defined reliability and confidence requirements: "The part must be free of visible cracks with a reliability greater than 90% with a 90% lower 1-sided confidence bound after being subjected to loading representative of 4,000 service hours." Durability, life data and reliability analyses can help engineers answer critical questions whether how long to test and how many parts to test in order to meet these life requirements. In this webinar, we will discuss the important link between testing to prove durability and testing to demonstrate reliability.

Saber mais