HBM이 준비한 웨비나

HBM은 온라인으로 사용자들과 소통하고, 정보를 공유하기 위하여 다양한 웨비나를 준비했습니다.

한국 엔지니어들이 준비한 무료 온라인 교육, 웨비나에 많은 참여바랍니다.


  "효율적인 중량 측정을 위한 디지털 로드셀의 장점 "

  2020년 8월 11일(화)      오전 10:00-11:00        한국어 강의

기존 아날로그 로드셀과 비교하여 디지털 로드셀의 장점은 무엇일까요?

HBM의 모듈 타입의 디지털 로드셀 제품은 개발자의 중량 측정 관련 개발 시간을 절약하여 고객들의 니즈에 맞추어 효과적인 중량 측정 솔루션 제품을 설계 및 제작 할 수 있습니다.

웨비나 자세히 살펴보기


 "BK Connect Impact Test "

 2020년 9월 10일(화)    오전 10:00-11:00      한국어 강의

BK Connect Hammer Impact Applet은 임팩트 햄머를 이용한  주파수 응답함수(FRFs) 측정을 보다 쉽게 제공합니다.

측정된 주파수 응답함수 들은 문제 해결을 위한 공진점의 확인과 제품 품질을 향상 시키기 위해 사용 가능합니다.

또한 BK Connect Modal Analysis와 연계하여 모달 파라메터들을 계산할수 있도록 합니다.

웨비나 자세히 살펴보기


  "소음 기초 이론 "

  2020년 10월 21일(수)    오전 10:00-11:00      한국어 강의

소음에 대한 기본 이론을 살펴봅니다.

  • Sound definition : Terminology of Sound, Sound pressure vs Sound power
  • dB Conversion : Range of Sound pressure level, Perception of dBs, Simple rules for conversion
  • Sound Fields
  • dB : Sound source, dB levels & value

웨비나 자세히 살펴보기


 "소음 측정 기초 이론 "

 2020년 10월 22일(목)    오전 10:00-11:00     한국어 강의

소음 측정에 대한 기본 이론을 살펴봅니다.

  • Sound  measurement consist : Microphone
  • Sound level meter : Time weighting
  • Equivalent Level

웨비나 자세히 살펴보기


 "소음 주파수 분석 기초 이론 "

 2020년 10월 23일(금)    오전 10:00-11:00     한국어 강의

소음 주파수 분석에 대한 기본 이론을 살펴봅니다.

  • Frequency : Frequency range, audible range
  • Frequency analysis : Filter types and frequency scales, 1/1 and 1/3 octaves filters
  • Perception of Sound : Auditory field , Equal loudness contours for pure tones, perception of noise, frequency weighting curves

웨비나 자세히 살펴보기



미국의 웨비나 - ET(미 동부) 시간 기준

“런치 앤 런” 15분 온라인 세션: 전력

토크 리플과 NVH 로부터 과도 토크에 따른 전력 측정

Read more

Optimize Key Parameters by Adding Sensor Data

  Tuesday, September 1, 2020       03:00 PM CET | 08:00 AM CT |  09:00 AM ET       online

In this webinar you will learn how to easily fine-tune and maintain algorithms running on Electronic Contrul Units (ECU). Additional sensor data, integrated via xCP interface, helps to understand the overall physics and to optimize software functionality.

Read more

Ensure Minimal Measurement Uncertainty

  Wednesday, September 2, 2020       10:00 AM CET       online

The webinar will provide a general introduction to Reference Transducers and Precision Amplifiers including recommendations on measurement uncertainty.

Read more

Challenges of Structural Health Monitoring (SHM)

  Wednesday, September 2, 2020       04:00 PM CET | 09:00 AM CT | 10:00 AM ET      online

In this webinar you will learn how to easily fine-tune and maintain algorithms running on Electronic Contrul Units (ECU). Additional sensor data, integrated via xCP interface, helps to understand the overall physics and to optimize software functionality.

Read more

Webinars by Brüel & Kjær (part of HBK)


  Tuesday, September 08, 2020       11:00 AM CET       online

Join this webinar for a thorough introduction to our brand-new data analysis software, BK Connect.

With modern and efficient work processes, getting the job done is easy. This session provides attendees with an overview of BK Connect and an understanding of the general scope of time data post-processing. Learn how to build your own analyzer process chain and how to link several chains into a working process.

Read more


  Tuesday, September 15, 2020       11:00 AM CET       online

A general introduction to the Type 2250 analyzer for users new to the instrument. It will cover using the meter to make measurements and transfer the results to a PC.

Read more


  Tuesday, September 22, 2020       11:00 AM CET       online

Join this open forum for Type 2250 and 2270 owners to learn how to get the best from your sound level meter. Subjects covered include establishing multiple users/templates and using data in other software.

Read more


  Tuesday, September 29, 2020       11:00 AM CET       online

Introduction to our Measurement Partner Suite covering data management and transfer, display, archives, export and post-processing.

Read more


  Tuesday, October 06, 2020       11:00 AM CET       online

B&K 2245 is the latest in our range of iconic sound level meters providing a complete solution for basic noise measurements, while combining functionality, ease-of-use and versatility with the reliability and confidence that is ensured with the Brüel & Kjær brand.

Join this webinar to learn more!

Read more


  Tuesday, October 13, 2020       11:00 AM CET       online

A introduction in how to make Sound and Impact Insulation measurements to current standards.

Read more

Maintenance Optimization and Production Improvement with

  Tuesday, August 11, 2020       1PM - 4PM EST       online

During this three-hour online session, attendees will learn how to increase system productivity, discover industry best practices and strategies for reducing the total life cycle cost. Attendees will see how ReliaSoft software can be used to conduct RAM analysis to optimize maintenance and production.

Read more

Design for Reliability Webinar Series: Part 2 - Reliabili

  Thursday, August 18, 2020       1:30 AM ET/11:00 AM IST/7:30 AM CET      online

Failure Mode and Effect Analysis (FMEA) is a very well known method used to discovering potential failures that may exist within the design of a product or process. Using Design FMEA (DFMEA), you can generate necessary information to quantify the reliability and use that as a baseline indicator to check whether it meets the Reliability Target. This webinar will discuss the process of translation such information from DFMEA to a Quantified Reliability Estimate using ReliaSoft XFMEA software.

Read more

Design for Reliability Webinar Series: Part 3 - Reliabili

  Thursday,September 17, 2020       5:30 AM ET/3:00 PM IST/11:30 AM CET       online

Time to market is a critical factor in any product’s success. With today’s high reliability requirements and short development cycles, testing for the full product life is expensive and impractical. By testing at elevated stress levels, the reliability of a component can be quantified in a shorter period of time, while saving money and resources. This process is called quantitative accelerated life testing (QALT) and employs several statistical and practical techniques to characterize product behaviour. During this webinar, we will introduce the theory and principles of QALT and life testing using Accelerated Lifes Testing module available in ReliaSoft Weibull++ software.

Read more

Design for Reliability Webinar Series: Part 4 - Reliabili

  Monday, October 26, 2020       1:30 AM ET/11:00 AM IST/7:30 AM CET       online

During this webinar, attendees get familiar with will the principles of reliability growth testing and strategies using ReliaSoft Weibull++ software.

Read more

Design for Reliability Webinar Series: Part 5 - Reliabili

  Wednesday, November 11, 2020       5:30 AM ET/3:00 PM IST/11:30 AM CET      online

Reliability and durability fit together in product validation testing. Often, the product’s life requirement is being able to withstand loading over a specified duration with defined reliability and confidence requirements: "The part must be free of visible cracks with a reliability greater than 90% with a 90% lower 1-sided confidence bound after being subjected to loading representative of 4,000 service hours." Durability, life data and reliability analyses can help engineers answer critical questions whether how long to test and how many parts to test in order to meet these life requirements. In this webinar, we will discuss the important link between testing to prove durability and testing to demonstrate reliability.

Read more

Webinars on demand

선택됨: 필터 없음

총 217 개의 결과가 검색되었습니다.

1:1 문의 이곳을 클릭하셔서 요청사항을 작성해 주세요