digiCLIP - 工业测量仪表 digiCLIP, 带你进入数字时代

18秒内开始测量…

digiCLIP 可以减少宕机时间! 其支持 TEDS, 传感器电子数据表. digiCLIP 带有 TEDS 芯片,可以自动识别传感器,无需进行复杂的配置和参数化。 无需人员培训,就可以操作 digiCLIP.

容易集成到自动化系统中

digiCLIP 非常容易集成到你的自动化系统中,因为 digiCLIP 采用标准的 PROFIBUS DP-V1, CANbus 或 DeviceNet 接口。所有的设定都可以通过电脑完成,并提供 免费的 digiCLIP 软件。替换放大器非常容易,无需关闭系统 – 因为其采用 "即插即测" 和 "热交换" 技术.

digiCLIP 模块

DF30

DF31

600 Hz 载频

TEDS 传感器识别

数字输入数量

-

1

数字输出数量

-

2

接口:

CANOPEN

DF30CAN

DF31CAN

Profibus-DP

DF30DP

DF31DP

DeviceNet

DF30DN

DF31DN

Device Typ Manager (DTM)

最新的免费设备类型管理器 (DTM) 可以对所有的 digiCLIP 放大器 进行控制.


DTM 提供参数化,控制和诊断功能. 另外,其提供一个图形化的用户接口用于直观操作. 安装 DTM 非常简单,就和安装打印机一样方便. 其可以集成到任何的带有标准 FDT 接口 (场设备工具)系统中, 例如监控系统.

digiCLIP DTM Certification

系统带有 FDT 接口和 DTM 的优势是显而易见的: 从系统的中心点,设备工程师就可以控制 digiCLIP 放大器,并获得报告。并可以进行细节诊断, 而无需直接操作。 如果你真正使用 digiCLIP,你可以进行升级,免费下载 DTM.. 更多信息在 FDT 接口 和我们最新的关于 DTM 的 技术文章.

ePLAN: 电气工程和项目计划更容易

ePLAN: 电气工程和项目计划更容易

除了工业放大器,HBM提供 EPLAN 宏。他们可以容易且无差错的集成到自动化项目规划中。.

ePLAN Electric P8 适用于数据库支持的 现代 CAE 软件 ,其可以进行自动化系统的项目计划,管理。 ePLAN 宏能够将 过程控制器非常容易集成到项目管理中. 通过 ePLAN Electric P8的宏,可以获得零部件数据,图纸和针脚分配.

免费的宏可以在过程控制器的文档光盘中获得,也可以从 这里 免费下载.

Product Literature

主题/描述 语言
技术参数表
French
English
German
French
English
German
Italian
French
English
German
French
English
German
French
English
German
French
English
German
Italian
选型手册
English
German
操作手册
German
French
English
German
French
English
German
French
English
安全说明
French, German, English
Declaration of Conformity
多语言
软件

digiCLIP Assistant, Firmware Loader and USB Driver (for Windows XP, Windows Vista and Windows 7/8/10) for easy setup of digiCLIP modules and for visualization.

For smooth operation of modules with CAN and DeviceNet interfaces, use the PEAK USB-to-CAN dongle.

For Profibus operation Hilscher and Siemens CP5511/12 and CP5711 is supported - to handle digiCLIP firmware-updates via CP5711 digiCLIP-modules have to be equipped with a adapted bootloader which is implemented starting with following serial-numbers: (DF30DP: 816711801 / DF31DP: 817427801).

All required drivers are included and will be installed during startup.


Date: 04/2016
Version: 2.6.5
Size: 77 MB
Related Documents:
多语言

This project is a macro-project and contains CAE data for Eplan Electric P8.


Date: 08/2011
Version: 1.00
Size: 42 MB
多语言

Contains the installation of the DeviceDTM in German and English for Windows 2000/XP/Vista/7/8/10 operating systems.

Prerequisite for using digiCLIP DTM setup is the installation of a frame application (e.g. FDT container, PACTware) - not included in this download.


Date: 12/2010
Version: 1.2.0.166
Size: 13 MB
Related Documents:
多语言

EDS files for digiCLIP DF30CAN and DF31CAN.


Date: 06/2014
Version: 1.36 / 1.20
Size: 13 KB
多语言

EDS files for digiCLIP DF30DN and DF31DN.


Date: 05/2015
Version: 1.12
Size: 25 KB
多语言

The CX-Integrator example program shows the basic test setup of a digiCLIP DF31DN connected to an Omron Sysmac CJ1M SPS with a CS1/CJ1 DRM21 fieldbus controller. In this example, consistent (coherent) data is read and written over the DeviceNet. The DF30DN operating manual provides all possible commands and values. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 763 KB
多语言

This applicatin is to describe an example of a small-scale digiCLIP amplifier application in a CAN network using a CANopen based PLC. In this application, load cells implemented as strain gage full bridges are used for determining the filling level in a tank and taring it to 0 ... 100% using a PLC connected to the digiCLIP. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 1 MB
多语言

This example considers a simple test assembly including a Siemens CPU313-2DP and a DF30DP/DF31DP (digiclip). In this example, consistent (coherent) data are written and read via the Profibus with SFC14 and SFC15. As an additonal programming the parametercontainer is programmed to configure the DF30DP in the cyclic data exchange. To read configurations with DPV1 the Siemens function block SFB52 (PNO AK1131)is programmed, too. All commands and values for the configuration are shown in the official manual.

Legal notice: The example given is intended to illustrate the integration of the DF30DP into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 7 MB
多语言

Archive including all current firmware files for modules of the digiCLIP series. The appropriate firmware loader is part of the digiCLIP assistant. The zip file has to be extracted into the digiCLIP assistant download directory.

DF30CAN version 1.44
DF31CAN version 1.28

DF30DP version 1.42
DF31DP version 1.28

DF30DN version 1.12
DF31DN version 1.12


Date: 05/2015
Size: 555 KB
Related Documents:
多语言

GSE/GSD files for digiCLIP DF30DP and DF31DP.


Date: 12/2012
Version: 1.34
Size: 3 KB
多语言
Tech Notes

This is an instruction for creating a FDT (Field Device Technology) project with the fdtCONTAINER which connects a Profibus digiCLIP (DF31DP) with a PC via an Ethernet gateway (THxEPI2).

German

This is an instruction for creating a FDT (Field Device Technology) project with the fdtCONTAINER which connects a Profibus digiCLIP (DF31DP) with a PC via an Ethernet gateway (THxEPI2).

English
HBMshop 立即获取报价,交货周期等
立即获取报价!

咨询 HBM 销售工程师

请发送给我:


开始您的询价

咨询 HBM 销售工程师

请发送给我:


开始您的询价

个人报价

技术咨询

快速响应