High Speed for High Channel Count
The GEN17tA offers high speed and high channel count data acquisition and transient recording for high end requirements.
GEN16t 配有一个高速 1 Gbit 光纤以太网接口，能够以 100 MB/s 的速率直接记录数据到PC。可选的 1 Gbit 光纤以太网允许主机进行隔离控制，电缆长度可高达 10 km，并且能保证极高的数据传输力。
可选 10 Gbit 光纤以太网接口能够使流盘速率高达 200 MB/s 或更高。当需要数据可靠或分布式存储时，GEN16t 主机能够通过固态硬盘或网络附加存储（NAS）设备完成。
通过 IRIG 或 IRIG/GPS 卡，GEN16t 能够同步绝对时间到其他系统。通过可选的 主/从 卡，多台 GEN DAQ 系统可以实现时间同步。
The 1 Gbit Ethernet interface can stream recorded data directly to the PC at a rate of 100 MB/s. The optional 1 Gbit Optical Ethernet allows for isolated control of the mainframe and for cable lengths up to 10 km (6.2 mi) while maintaining full streaming performance. For higher streaming rates of 400 MB/s, a 10 Gbit electrical or optical Ethernet option is available. When more reliable or distributed storage of recorded data is required the GEN17tA mainframe supports an optional, removable Solid State Disk (SSD) or it can store recorded data directly on a Network Attached Storage (NAS) device.
Full transparent time and trigger synchronization on multiple Genesis High Speed DAQ systems can be achieved by using the standard optical Master/Slave synchronization connector. To synchronize the absolute time to non Genesis High Speed systems, GEN17tA supports PTP (Precision Time Protocol) and optional IRIG A and B or GPS.
|GEN series GEN17tA - Data Sheet||English|
|eDrive testing - Brochure||Italian|
|eDrive testing - Brochure||Chinese|
|eDrive testing - Brochure||Japanese|
|eDrive testing - Brochure||French|
|eDrive Testing - Brochure||English|
|eDrive Testing - Broschüre||German|
|Genesis High Speed - Brochure||Portuguese|
|Genesis High Speed - Brochure (US)||English (US)|
|Genesis HighSpeed - Brochure||English|
|Genesis HighSpeed - Broschüre||German|
|7600 Isolated Digitizer GEN series - User Manual||English|
|GEN17ta - User Manual||English|
|HV Impulse Attenuator - User Manual||English|
|Isolated Digitizer GEN series - User Manual||English|
|GEN series G070A - Data Sheet||English|
|GEN series G072 - Data Sheet||English|
|HV Impulse Attenuator - Data Sheet||English|
|GENseries - Sicherheitshinweise||Russian, Korean, Japanese, Chinese, Portuguese, French, German, English|
|Declaration of Conformity|
|1-KAB, K-KAB (cable)- EU Declaration of Conformity||多语言|
|GEN series - EU Declaration of Conformity||多语言|
|Calibration and Verification Software Version 2.98 GEN series - User Manual||English|
|GEN series Calibration Kit - Data Sheet||English|
Perception Feature Preview 3 64-bit
Perception Preview Version 3
This is a special version of Perception allowing interested customers to get used to feature from the „next“ Perception version to become available.
A Preview version contains new features and is tested, but not to the extent of a regular release. It is also not shipped with new hardware but only available as download for customer to test.
Main new features added in this preview:
- FFT export of peak values
- Extended GEN DAQ API : basic setup
- File sharing from mainframe HDD
- BE3200 usability improvements
- RT-FDB for GN1202B and GN810xB
- MDF4 export now includes RT-FDB results
- GN1202B support
- Space vectors in real time
- Efficiency heat map creation in real time
Size: 413 MB
Perception Software 64-bit
Perception Enterprise (1-PERC-E64) is no longer required to run the 64-bit version of Perception. Therefore all Perception versions are available in 64-bit.
This 64-bit version of Perception includes "Full install", "Offline install" and "Free viewer install" - each installation with own set of features.
The Free viewer version of Perception software can be used free of charge.
Please note: Perception now includes the instruments firmware. That means it no longer requires an additional download of the firmware for the GEN DAQ systems.
Size: 398 MB