即将开始的 Webinars

Accurate Load Measurements in Marine Engines

  Tuesday, February 18, 2020       10:00 AM CET       online

Stringent regulations on emissions for marine engines are making it more difficult for the industry to stay cost effective. An accurate load measurements can ensure that ships fulfill to the new standards while remaining competitive.

Read more

Understanding Source of Noise of Electric Engines

  Tuesday, February 18, 2020       02:00 PM CET       online

Electrification has changed how we experience a vehicle’s noise and how the vibration effects the durability of parts. Testing for noise and vibration and electrical quantities at the same time will provide an extended insight into how the electric machines and inverters are causing noise and vibration and how to amplify or mitigate it.

Read more

Structural Dynamics Measurements and Analysis

  Wednesday, February 19, 2020       10:00 AM CET       online

The webinar gives an overview of structural dynamics measurement and analysis techniques and applications in order to better understand and optimise the dynamic behaviour of structures. The topics are explained in an easy-to-understand manner with focus on examples and practical aspects.


The fundamentals described in this introductory webinar is followed up by a series of more in-depth webinars on Operating Deflection Shapes (ODS) analysis, Classical Modal Analysis and Operational Modal Analysis.

Read more

Accelerometers for Beginners

  Tuesday, February 19, 2020       02:00 PM CET       online

This webinar will discuss how to select an accelerometer, how to properly use it and take care of it.

Read more

Building sensors based on strain gauge technology

  Thursday, February 20, 2020       10:00 AM CET       online

This webinar will give you a short introduction to strain gauge based sensors. Learn how to identify the right strain gauge for your application.

Read more

ODS – Vibration Patterns under Operating Condition

  Thursday, February 20, 2020       02:00 PM CET       online

Operating Deflection Shapes (ODS) analysis determines the vibration patterns of a structure under operating conditions. The vibration patterns are shown as animated geometric models and display a combination of the forcing function acting on the structure and the dynamic properties of the structure.
ODS analysis can be done both in the time and spectral domain by relatively simple means. It provides very useful information for understanding the dynamic behaviour of structures and is one of the most used applications in structural dynamics. 

Read more

Signal measurement in full-scale aircraft testing

  Friday, February 21, 2020       10:00 AM CET       online

In this webinar we will guide you through typical overall requirements in high-channel count mixed signal measurement, the so-called Iron Bird Test, sketching out how a data acquisition setup might look like and how to get more insights of your data.

Read more

Electrical & Optical Strain Gauges in Wind Turbine

  Friday, February 21, 2020       02:00 PM CET       online

Understand the possibilities, and limitations, of different strain gauge types when used in the harsh environment of offshore wind turbine applications. This webinar covers sensor selection and installation and explains where the hidden costs are, for both design validation measurements, and long-term structural health monitoring. Learn how to avoid expensive mistakes in measurement system configurations for monopiles, jackets and gravity base structures. 

Read more

即将开始的 Webinars

Noise & Vibration in Electric Machines

  Tuesday,  February 18, 2020       2:00 PM ET       online

Electrification has changed how we experience a vehicle’s noise and how the vibration effects the durability of parts. This webinar will discuss what causes noise and vibration in electric machines, how electrical and mechanical signals are correlated, how simultaneous testing of electrical and NVH signals can speed up testing, mapping NVH against motor controls, end of line testing and more. 

Read more

In Vehicle Electric Power Measurements II

  Tuesday,  March 24, 2020       2:00 PM ET       online

This webinar will review the topics presented in “In Vehicle Electric Power Measurement Part I” which include the challenges, dynamic testing, examples as well as discuss some of the techniques and best practices for doing an effective in vehicle project.

Read more

关于 webinars 您所想了解的

  • 什么是 webinar?
    webinar 是 web 和研讨会的组合产生的新名词,也称为网络研讨会。顾名思义,网络研讨会是集合了在线研讨会、演讲、课程以及(在某些情况下)讨论等,旨在向与会者传授关于相关主题的知识和技能等。
  • 如何参加 HBM webinars?
    从列表中选择一个网络研讨会。单击标题,将会连接到包含活动信息和注册按钮的子页面,或直接指向我们在线研讨会的注册页面,称为WebEx。请按照说明注册网络研讨会。
  • 我需要哪些硬件参加 webinar?
    您需要一台连接互联网并带有扬声器或耳机的计算机。
  • 在 webinar 期间,如果我有技术问题怎么办?
    没问题:在网络研讨会期间,您可以通过问答功能向演示者或主持人提问。你的问题可马上就会解决。
  • 我能在 webinar 上提问吗?
    您可以使用问答功能提出问题,但这些问题将在演示后回答。
  • 参加 HBM webinars 需要支付费用吗?
    不需要,我们的 webinars 是免费的。
  • 如果我注册了,但错过了 webinar 怎么办 ?
    如果你不能参加 webinars,通常几天后您在 hbm.com上观看网络研讨会的视频。如果您已注册,您还将在网络研讨会后收到一封包含更多信息的电子邮件。

Webinars on demand

已选择 不使用筛选

您的结果已返回 180 结果.

联系我们 如果您希望与HBM联系,无论是技术问题还是希望进行商务合作或者是产品咨询,我们都将为您服务